ESD PET silicone tape

ESD PET silicone tape is an anti-static tape composed of a polyester film (PET) base and a silicone adhesive. It is non-toxic, odorless, and safe for both human use and the environment. This tape is designed for applications requiring static control, high-temperature resistance, and clean removal.

ESD PET Tape

1 file(s) 189.76 KB

Download

Color	Clear/Green/Blue	Clear/Green/Blue	Clear/Green/Blue	Red/Yellow
Carrier	Polyester	Polyester	Polyester	Polyester
Adhesive	Silicone	Silicone	Silicone	Silicone
Carrier Thickness (mm)	0.035	0.05	0.025	0.025
Adhesive Thickness (mm)	0.025	0.03	0.035	0.065
Total Thickness (mm)	0.06	0.08	0.06	0.09
Adhesion (N/25mm)	6	6	6	8
Tensile Strength (N/25mm)	135	220	115	135
Elongation at Break (%)	40	50	35	35
Corrosion Resistance	1	1	1	1
Storage Condition	20°Ci65RH	20°C,65RH	20°C,65RH	20°C,65RH
Long Term Heat Resistance (°C)	180	180	180	180
Short Term Heat Resistance (°C)	220	220	220	220
RoHS	Complied
Width	2'980mm
Length	33m/66m
These values are measured values and not guaranteed values.

ESD PET silicone tape Features

Anti-Static Properties:
Provides limited static dissipation to reduce the risk of electrostatic discharge (ESD) damage.
Note: It cannot fully eliminate static electricity generation or accumulation.
High-Temperature Resistance:
Withstands temperatures up to 230°C, making it suitable for high-temperature shielding and protection.
Clean Removal:
Leaves no adhesive residue after tearing off, ensuring a clean surface.
Strong Adhesion:
Offers excellent bonding strength, even in high-temperature or solvent-exposed environments.
Solvent Resistance:
Performs well in environments with exposure to solvents, protecting sensitive components like PC boards coated with gold.
Non-Toxic & Eco-Friendly:
Safe for use in various environments without harming users or polluting the surroundings.

ESD PET silicone tape Application

Electronics Manufacturing:
Masking thermal elements on printed circuit boards (PCBs) during soldering processes (e.g., wave soldering or reflow soldering).
Temporary holding of components during assembly or soldering.
High-Temperature Shielding:
Protects sensitive areas from heat exposure during manufacturing processes.
General ESD Protection:
Used in environments where limited static control is required, such as in electronics assembly or repair.
Masking of thermal elements of printed circuit boards and temporary holding during wave soldering or reflow soldering.

It should be noted that the anti-static performance of anti-static PET silicone tape is limited and cannot completely eliminate the generation and accumulation of static electricity. In the process of use, it is also necessary to pay attention to the environment and conditions of its use, such as maintaining environmental humidity and avoiding direct contact with electrostatic-sensitive devices.